(2022, May) Metals Vol. 12 (5) MDPI AG

Library Home Bookshelves View by Type Using Search

Books Catalogs/Sales Lists Journals Reports Thesis/Dissertation

Search for Books Search for Journals Manage Subjects Statistics Books without DDC/LCC Top Unstructured Orphaned Articles

Bookshelves (DDC layout)Bookshelves (LCC layout)Latest Books

Advanced

Search inside 'Metals' only

- Only viewable:

Reference Type	Journal (issue)
Journal	Metals	ISSN	2075-4701
Year	2022 (May)	Volume	12
Issue	< 5 >
Publisher	MDPI AG
Mindat Ref. ID	15204411	Long-form Identifier	mindat:1:5:15204411:6
GUID	0
Full Reference	(2022, May) Metals Vol. 12 (5) MDPI AG
Plain Text	(2022, May) Metals Vol. 12 (5) MDPI AG
In	(2022) Metals Vol. 12. MDPI AG

Contains

	Li, Jinghui, Yu, Renhai, Xu, Gaoshan, Chen, Changhua, Ha, Yao, Song, Leijun, Zhang, Huiping (2022) Research on Hot Deformation Behavior of F92 Steel Based on Stress Correction. Metals, 12 (5) 698 doi:10.3390/met12050698
	Wu, Cheng-Tse, Bussmann, Markus, Chattopadhyay, Kinnor (2022) Effect of Vacuum Heat Treatment on the Microstructure of a Laser Powder-Bed Fusion-Fabricated NiTa Alloy. Metals, 12 (5) 700 doi:10.3390/met12050700
	Li, Jiaxin, Kuai, Zezhou, Li, Zhonghua, Liu, Bin, Chen, Yanlei, Lu, Shengyu, Nie, Yunfei, Yang, Zhicheng (2022) Effects of Process Parameters on the Relative Density and Properties of CuCrZr Alloy Produced by Selective Laser Melting. Metals, 12 (5) 701 doi:10.3390/met12050701
	Liu, Xiaohang, Cui, Wanqi, Wang, Yunru, Long, Yihao, Liu, Fulin, Liu, Yongjie (2022) Effects of Heat Treatment on the Microstructure Evolution and Mechanical Properties of Selective Laser Melted TC4 Titanium Alloy. Metals, 12 (5) 702 doi:10.3390/met12050702
	Trebukhov, Sergey, Volodin, Valeriy, Nitsenko, Alina, Burabaeva, Nurila, Ruzakhunova, Galiya (2022) Recovery of Zinc from the Concentrate of Domestic Waste Processing by Vacuum Distillation. Metals, 12 (5) 703 doi:10.3390/met12050703
	Yeon, Si-Mo, Yoon, Jongcheon, Kim, Tae Bum, Lee, Seung Ho, Jun, Tea-Sung, Son, Yong, Choi, Kyunsuk (2022) Normalizing Effect of Heat Treatment Processing on 17-4 PH Stainless Steel Manufactured by Powder Bed Fusion. Metals, 12 (5) 704 doi:10.3390/met12050704
	Ou, Guofu, Qian, Guangwei, Jin, Haozhe, Wu, Wangping, Li, Qianqian (2022) Microstructure and Corrosion Resistance of Fusion Welding Zone for Duplextubes Welded with Q345R Tube Sheet under Different Welding Currents. Metals, 12 (5) 705 doi:10.3390/met12050705
	Kumar, Sourabh, Chandra, Saroj Kumar, Dixit, Saurav, Kumar, Kaushal, Kumar, Shivam, Murali, Gunasekaran, Vatin, Nikolay Ivanovich, Sabri Sabri, Mohanad Muayad (2022) Neural Network Prediction of Slurry Erosion Wear of Ni-WC Coated Stainless Steel 420. Metals, 12 (5) 706 doi:10.3390/met12050706
	*Miao, Keyan, Nabeel, Muhammad, Dogan, Neslihan (2022) Coarsening Mechanisms of CaS Inclusions in Ca-Treated Steels. Metals, 12 (5) 707 doi:10.3390/met12050707*
	Kramer, Berenice, Deng, Yuanbin, Lentz, Jonathan, Broeckmann, Christoph, Theisen, Werner, Weber, Sebastian (2022) Martensite Transformation in Tool Steels under Isostatic Pressure–Implementation of In-Situ Electrical Resistivity Measurements into a Hot Isostatic Press with Rapid Quenching Technology. Metals, 12 (5) 708 doi:10.3390/met12050708
	Kallio, Rita, Tanskanen, Pekka, Heikkinen, Eetu-Pekka, Kokkonen, Tommi, Luukkanen, Saija, Fabritius, Timo (2022) Slag Modification in Reduction of Kiviniemi Ferrous Scandium Concentrates. Metals, 12 (5) 709 doi:10.3390/met12050709
	Gruber, Christian, Raninger, Peter, Maierhofer, Jürgen, Gänser, Hans-Peter, Stanojevic, Aleksandar, Hohenwarter, Anton, Pippan, Reinhard (2022) Microstructural Impact on Fatigue Crack Growth Behavior of Alloy 718. Metals, 12 (5) 710 doi:10.3390/met12050710
	Zhang, Han, Li, Chang’an, Zhu, Zhiming (2022) Influence of CDFW Process Parameters on Microstructure and Mechanical Properties of U75V Rail Steel Welded Joint. Metals, 12 (5) 711 doi:10.3390/met12050711
	Wang, Xiaona, Zhang, Haibin, Yan, Shinong, Zhang, Yongmei, Tian, Xiaolin, Peng, Dunwei, Zhao, Yuhong (2022) The Response Mechanism of Crystal Orientation to Grain Boundary Dislocation under Uniaxial Strain: A Phase-Field-Crystal Study. Metals, 12 (5) 712 doi:10.3390/met12050712
	*Moreira, Aida B., Ribeiro, Laura M. M., Vieira, Manuel F. (2022) Cast Austenitic Stainless Steel Reinforced with WC Fabricated by Ex Situ Technique. Metals, 12 (5) 713 doi:10.3390/met12050713*
	Jia, Minghao, Hu, Pei, Gong, Zisang, Sun, Jian, Cui, Yong, Hu, Dongbo, Hu, Gang (2022) Corrosion Inhibition and Rust Conversion of Catechin on Archaeological Iron of Nanhai I. Metals, 12 (5) 714 doi:10.3390/met12050714
	Liu, Jihui, Kong, Weiguo, Yang, Xin, Wang, Qi, He, Zhijun, Hou, Xinmei (2022) Polymeric Structure Evolution Behavior Analysis of Aluminosilicate-Based Smelting Slag. Metals, 12 (5) 715 doi:10.3390/met12050715
	Dong, Yifan, Liu, Denghui, Hong, Liang, Liu, Jingjing, Zuo, Xiurong (2022) Correlation between Microstructure and Mechanical Properties of Welded Joint of X70 Submarine Pipeline Steel with Heavy Wall Thickness. Metals, 12 (5) 716 doi:10.3390/met12050716
	Yamamoto, Yukinori, Ren, Qing-Qiang, Brady, Michael P. (2022) Role of Cr Content in Microstructure, Creep, and Oxidation Resistance of Alumina-Forming Austenitic Alloys at 850–900 °C. Metals, 12 (5) 717 doi:10.3390/met12050717
	*Lu, Xinliang, Zhang, Zhaohui, Lv, Ming, Li, Xintao, Song, Baomin, Fang, Ming (2022) Evolution of Non-Metallic Inclusions in 27SiMn Steel. Metals, 12 (5) 718 doi:10.3390/met12050718*
	Liu, Kaiyang, Zhou, Yixin, Yin, Lixia, Shi, Yindong, Huang, Guangwei, Liu, Xiaoyan, Zheng, Liyun, Xing, Zhenguo, Zhang, Xiliang, Liang, Shunxing (2022) Surface Microstructure and Performance of Anodized TZ30 Alloy in SBF Solution. Metals, 12 (5) 719 doi:10.3390/met12050719
	Barrera, Carlos, García-Herrera, Claudio, Celentano, Diego J., Signorelli, Javier W. (2022) Material and Damage Characterization of the Elastoplastic Response of the EK4 Deep Drawing Steel. Metals, 12 (5) 720 doi:10.3390/met12050720
	Xin, Chao, Wang, Qi, Ren, Junqiang, Zhang, Yonghong, Wu, Jinping, Chen, Jie, Zhang, Liang, Sang, Biao, Li, Le (2022) Plastic Deformation Mechanism and Slip Transmission Behavior of Commercially Pure Ti during In Situ Tensile Deformation. Metals, 12 (5) 721 doi:10.3390/met12050721
	Grigoriev, Sergey N., Gusarov, Andrey V., Metel, Alexander S., Tarasova, Tatiana V., Volosova, Marina A., Okunkova, Anna A., Gusev, Andrey S. (2022) Beam Shaping in Laser Powder Bed Fusion: Péclet Number and Dynamic Simulation. Metals, 12 (5) 722 doi:10.3390/met12050722
	Aryshenskii, Evgenii, Hirsch, Jurgen, Drits, Alexander, Konovalov, Sergey, Aryshenskii, Vladimir, Tepterev, Maksim (2022) Texture Development in Aluminum Alloys with High Magnesium Content. Metals, 12 (5) 723 doi:10.3390/met12050723
	Acierno, Aaron, Mostafaei, Amir, Toman, Jakub, Kimes, Katerina, Boin, Mirko, Wimpory, Robert C., Laitinen, Ville, Saren, Andrey, Ullakko, Kari, Chmielus, Markus (2022) Characterizing Changes in Grain Growth, Mechanical Properties, and Transformation Properties in Differently Sintered and Annealed Binder-Jet 3D Printed 14M Ni–Mn–Ga Magnetic Shape Memory Alloys. Metals, 12 (5) 724 doi:10.3390/met12050724
	Xia, Xiaowei, Wu, Jiefeng, Liu, Zhihong, Ma, Jianguo, Ji, Haibiao, Lin, Xiaodong (2022) Numerical Simulation of 50 mm 316L Steel Joint of EBW and Its Experimental Validation. Metals, 12 (5) 725 doi:10.3390/met12050725
	*Zheng, Tao, Song, Qinghua, Du, Yicong, Liu, Zhanqiang (2022) Development of Tool Wear Standards and Wear Mechanism for Micro Milling Ti-6Al-4V Alloy. Metals, 12 (5) 726 doi:10.3390/met12050726*
	Drajlin, D. Sebastián, Suarez, Daniela S., Toro, Norman, Gálvez, Edelmira D., Pinna, Eliana G., Rodriguez, Mario H. (2022) Comparative Study of the Dissolution of LCO in HCl Medium with and without H2O2. Metals, 12 (5) 727 doi:10.3390/met12050727
	Seleznev, Anton, Pinargote, Nestor Washington Solis, Smirnov, Anton (2022) Correction: Seleznev et al. Ceramic Cutting Materials and Tools Suitable for Machining High-Temperature Nickel-Based Alloys: A Review. Metals 2021, 11, 1385. Metals, 12 (5) 728 doi:10.3390/met12050728
	Watanabe, Hideo, Tanaka, Tomonari, Turu, Takuya, Kamada, Yasuhiro (2022) Direct Observation of Cu Clusters and Dislocation Loops by Cs-Corrected STEM in Fe-0.6wt%Cu Alloy Irradiated in BR2. Metals, 12 (5) 729 doi:10.3390/met12050729
	*Nieves, Javier, Bravo, Beñat, Sierra, David-Ciro (2022) A Smart Digital Twin to Stabilize Return Sand Temperature without Using Coolers. Metals, 12 (5) 730 doi:10.3390/met12050730*
	*Astafurova, Elena G. (2022) Thermo-Mechanical Processing and Additive Manufacturing of Steels. Metals, 12 (5) 731 doi:10.3390/met12050731*
	Panin, Alexey, Dmitriev, Andrey, Nikonov, Anton, Perevalova, Olga, Kazantseva, Lyudmila, Bakulin, Alexander, Kulkova, Svetlana (2022) Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment Part II: Ti-6Al-4V Titanium Alloy. Metals, 12 (5) 732 doi:10.3390/met12050732
	Deshmukh, Sandip M., Patil, Santosh S., Babar, Santosh B., Alshehri, Sultan, Ghoneim, Mohammed M., Tamboli, Asiya M., Lam, Nguyen Hoang, Truong, Nguyen Tam Nguyen, Kim, Chang Duk, Tamboli, Mohaseen S., Khetre, Sanjay M., Bamane, Sambhaji R. (2022) TiO2–SnO2 Nanocomposites for Photocatalytic Environmental Remediation under UV-Light. Metals, 12 (5) 733 doi:10.3390/met12050733
	Tamayo, Daimer Velazquez, Brollo, Gabriela Lujan, Oliveira, Juliana Rodrigues de, Miani, Fabio, Zoqui, Eugênio José (2022) The Thixoforming Process Window for Al-Si-Zn Alloys Using the Differentiation Method: The Role of Si, Heating Rate and Sample Mass. Metals, 12 (5) 734 doi:10.3390/met12050734
	Wang, Mei, You, Bo, Wu, Yan, Liang, Bo, Gao, Xianhui, Li, Wei, Wei, Qingsong (2022) Effect of Cr, Mo, and V Elements on the Microstructure and Thermal Fatigue Properties of the Chromium Hot-Work Steels Processed by Selective Laser Melting. Metals, 12 (5) 735 doi:10.3390/met12050735
	Li, Xun, Guo, Zhiyuan, Yang, Shenliang, Zhang, Hongbin, Wang, Ziming (2022) Study on the Effect of Milling Surface Plastic Deformation on Fatigue Performance of 20Cr and TC17 Specimens. Metals, 12 (5) 736 doi:10.3390/met12050736
	Kaisheva, Darina, Anchev, Angel, Valkov, Stefan, Dunchev, Vladimir, Kotlarski, Georgi, Stoyanov, Borislav, Ormanova, Maria, Atanasova, Milka, Petrov, Peter (2022) Influence of Beam Power on Structures and Mechanical Characteristics of Electron-Beam-Welded Joints of Copper and Stainless Steel. Metals, 12 (5) 737 doi:10.3390/met12050737
	*Seguí, Concepció (2022) Kinetics of Reordering in Quenched Ni2Mn0.8Cu0.2Ga Ferromagnetic Shape Memory Alloys. Metals, 12 (5) 738 doi:10.3390/met12050738*
	*Branco, Ricardo, Berto, Filippo, Wu, Shengchuan (2022) Computational Methods for Fatigue and Fracture. Metals, 12 (5) 739 doi:10.3390/met12050739*
	*Bo, Shenghong, Guo, Yaxiong, Liu, Qibin (2022) [(AlxTi1−x)-(FeCoNi)12](AlxTi1−x)0.5Cr2.5 High-Entropy Alloy Coating by Laser Cladding. Metals, 12 (5) 740 doi:10.3390/met12050740*
	Kotov, Anton D., Postnikova, Maria N., Mosleh, Ahmed O., Cheverikin, Vladimir V., Mikhaylovskaya, Anastasia V. (2022) Microstructure and Superplastic Behavior of Ni-Modified Ti-Al-Mo-V Alloys. Metals, 12 (5) 741 doi:10.3390/met12050741
	*Lan, Mo, He, Zhanwei, Hu, Xiaojun (2022) Optimization of Iron Recovery from BOF Slag by Oxidation and Magnetic Separation. Metals, 12 (5) 742 doi:10.3390/met12050742*
	*Scott, Colin P. (2022) Recent Developments in Medium and High Manganese Steels. Metals, 12 (5) 743 doi:10.3390/met12050743*
	Pirošková, Jana, Klimko, Jakub, Trpčevská, Jarmila, Laubertová, Martina, Plešingerová, Beatrice, Liptai, Pavol, Vindt, Tomáš, Oráč, Dušan (2022) Characterization of Galvanizing Flue Dust and Recycling Possibilities. Metals, 12 (5) 744 doi:10.3390/met12050744
	Lafilé, Vincent, Marteau, Julie, Risbet, Marion, Bouvier, Salima, Merino, Pierrick, Saulot, Aurélien (2022) Characterization of the Microstructure Changes Induced by a Rolling Contact Bench Reproducing Wheel/Rail Contact on a Pearlitic Steel. Metals, 12 (5) 745 doi:10.3390/met12050745
	*Liu, Zhongqiu (2022) Numerical Modeling of Metallurgical Processes: Continuous Casting and Electroslag Remelting. Metals, 12 (5) 746 doi:10.3390/met12050746*
	Fricke, Lara Vivian, Gerstein, Gregory, Kotzbauer, Andreas, Breidenstein, Bernd, Barton, Sebastian, Maier, Hans Jürgen (2022) High Strain Rate and Stress-State-Dependent Martensite Transformation in AISI 304 at Low Temperatures. Metals, 12 (5) 747 doi:10.3390/met12050747
	*Fais, Alessandro (2022) Advancements and Prospects in Electro-Sinter-Forging. Metals, 12 (5) 748 doi:10.3390/met12050748*
	Wang, Shuming, Tong, Han, Wang, Dong, Li, Xiaohai (2022) Thermodynamic Analysis and Experimental Study of Masked Corrosion Protection of 304 Stainless Steel Processed with Nanosecond Pulsed Laser. Metals, 12 (5) 749 doi:10.3390/met12050749
	Hofele, Markus, Roth, André, Hegele, Patrick, Schubert, Tim, Schanz, Jochen, Harrison, David K., De Silva, Anjali K. M., Riegel, Harald (2022) Influence of Laser Polishing on the Material Properties of Aluminium L-PBF Components. Metals, 12 (5) 750 doi:10.3390/met12050750
	*Sun, Guobin, Xiang, Xiaodong (2022) Study on Mass Transfer of Phosphorus Based on New Hot-Metal Dephosphorization Kinetic Model. Metals, 12 (5) 751 doi:10.3390/met12050751*
	Haußmann, Lukas, Neumeier, Steffen, Bresler, Johannes, Keim, Simon, Pyczak, Florian, Göken, Mathias (2022) Influence of Nb, Ta and Zr on the Interdiffusion Coefficients and Solid Solution Strengthening of γ-TiAl Single Phase Alloys. Metals, 12 (5) 752 doi:10.3390/met12050752
	Qian, Hui-Dong, Lim, Jung Tae, Kim, Jong-Woo, Yang, Yang, Zhou, Tian Hong, Jeon, Han Kook, Park, Jihoon, Choi, Chul-Jin (2022) Physical and Magnetic Properties of ThMn12-Type Sm(Fe0.8Co0.2)10Si2 Melt-Spun Ribbons. Metals, 12 (5) 753 doi:10.3390/met12050753
	Tang, Chenjun, Xuan, Ming, Deng, Kexing, Ran, Songlin (2022) Enhanced Strength and Electrical Conductivity in Graphite-Cement Mortars with Carbonized Titanium-Bearing Blast Furnace Slag as an Aggregate. Metals, 12 (5) 754 doi:10.3390/met12050754
	Wu, Zhenxing, Chen, Xuedong, Fan, Zhichao, Zhou, Yu, Dong, Jie (2022) Studies of High-Temperature Fatigue Behavior and Mechanism for Nickel-Based Superalloy Inconel 625. Metals, 12 (5) 755 doi:10.3390/met12050755
	*Cao, Xu, Wu, Changjun, Liu, Ya, Peng, Haoping, Su, Xuping (2022) Eutectic Reaction and Microstructure Stability in CoCrFeNiNbx High-Entropy Alloys. Metals, 12 (5) 756 doi:10.3390/met12050756*
	*Kuo, Shih-Kang, Ou, Yi-Liang, Wang, Dung-An (2022) An Analytical Model for Stress and Curvature Prediction of a Strip Leveling Process. Metals, 12 (5) 757 doi:10.3390/met12050757*
	Claesson, Erik, Magnusson, Hans, Kohlbrecher, Joachim, Thuvander, Mattias, Lindberg, Fredrik, Andersson, Magnus, Hedström, Peter (2022) Carbide Precipitation during Processing of Two Low-Alloyed Martensitic Tool Steels with 0.11 and 0.17 V/Mo Ratios Studied by Neutron Scattering, Electron Microscopy and Atom Probe. Metals, 12 (5) 758 doi:10.3390/met12050758
	Lopez-Garcia, Ricardo Daniel, Medina-Juárez, Israel, Maldonado-Reyes, Araceli (2022) Effect of Quenching Parameters on Distortion Phenomena in AISI 4340 Steel. Metals, 12 (5) 759 doi:10.3390/met12050759
	Okunkova, Anna A., Shekhtman, Semen R., Metel, Alexander S., Suhova, Nadegda A., Fedorov, Sergey V., Volosova, Marina A., Grigoriev, Sergey N. (2022) On Defect Minimization Caused by Oxide Phase Formation in Laser Powder Bed Fusion. Metals, 12 (5) 760 doi:10.3390/met12050760
	Wang, Ziqiang, Yu, Miaosen, Yang, Chen, Long, Xuehao, Gao, Ning, Yao, Zhongwen, Dong, Limin, Wang, Xuelin (2022) Effect of Radiation Defects on Thermo–Mechanical Properties of UO2 Investigated by Molecular Dynamics Method. Metals, 12 (5) 761 doi:10.3390/met12050761
	Fukumoto, Ken-ichi, Umehara, Kohei, Yabuuchi, Kiyohiro (2022) Dynamic Interaction between Dislocation and Irradiation-Induced Defects in Stainless Steels during Tensile Deformation. Metals, 12 (5) 762 doi:10.3390/met12050762
	Xia, Yaping, Wang, Zhen, Wang, Li, Chen, Yangchun, Liu, Zhixiao, Wang, Qingqing, Wu, Lu, Deng, Huiqiu (2022) Molecular Dynamics Simulations of Xe Behaviors at the Grain Boundary in UO2. Metals, 12 (5) 763 doi:10.3390/met12050763
	*Zhang, Zicheng, Li, Bin, Manabe, Ken-Ichi, Sato, Hideki (2022) Evaluation of Circumferential Mechanical Properties of Tubular Material by Flaring Test. Metals, 12 (5) 764 doi:10.3390/met12050764*
	Jorge, Vinicius Lemes, Teixeira, Felipe Ribeiro, Scotti, Américo (2022) Pyrometrical Interlayer Temperature Measurement in WAAM of Thin Wall: Strategies, Limitations and Functionality. Metals, 12 (5) 765 doi:10.3390/met12050765
	Guan, Feng, Fan, Suo, Wang, Junlong, Li, Guangyu, Zhang, Zheng, Jiang, Wenming (2022) Effect of Vibration Acceleration on Interface Microstructure and Bonding Strength of Mg–Al Bimetal Produced by Compound Casting. Metals, 12 (5) 766 doi:10.3390/met12050766
	Pang, Zheng, Yang, Jin, Manladan, Sunusi Marwana, Cai, Yangchuan, Han, Jian (2022) Effect of High-Temperature Heat Treatment on Strengthening Mechanism of AlCoCrFeNi Component Fabricated by LMD. Metals, 12 (5) 767 doi:10.3390/met12050767
	*Sun, Lifeng, Liu, Zhengyue, Jiang, Maofa (2022) Phase Equilibria of CaO-SiO2-La2O3-Nb2O5 System in Reducing Atmosphere. Metals, 12 (5) 768 doi:10.3390/met12050768*
	Danish, Mir Sayed Shah, Estrella-Pajulas, Liezel L., Alemaida, Ivy Michelle, Grilli, Maria Luisa, Mikhaylov, Alexey, Senjyu, Tomonobu (2022) Green Synthesis of Silver Oxide Nanoparticles for Photocatalytic Environmental Remediation and Biomedical Applications. Metals, 12 (5) 769 doi:10.3390/met12050769
	Cheng, Jun, Yu, Sen, Li, Jinshan, Gai, Jinyang, Du, Zhaoxin, Dong, Fuyu, Zhang, Jinyong, Zhang, Xiaoyong (2022) Precipitation Behavior and Microstructural Evolution of α Phase during Hot Deformation in a Novel β-Air-Cooled Metastable β-Type Ti-B12 Alloy. Metals, 12 (5) 770 doi:10.3390/met12050770
	Meng, Wei, Zhu, Haifeng, Wang, Xiaopeng, Li, Guanghui, Fan, Yingze, Sun, Deen, Kong, Fantao (2022) Electrochemical Behavior and Surface Conductivity of C/TiC Nanocomposite Coating on Titanium for PEMFC Bipolar Plate. Metals, 12 (5) 771 doi:10.3390/met12050771
	Li, Rongbin, Huang, Tian, Zhang, Jing, Jiang, Chunxia, Zhang, Yong, Liaw, Peter (2022) Microstructures, Mechanical Behavior, and Radiation Damage of (TiVCr)x-(TaW)1-x Binary System High-Entropy Alloy Films. Metals, 12 (5) 772 doi:10.3390/met12050772
	Hu, Jianhua, Yang, Sheng, Shuai, Zhongfu, Wang, Xiaohua, Xu, Hongyan (2022) Microstructure Study on Large-Sized Ti–6Al–4V Bar Three-High Skew Rolling Based on Cellular Automaton Model. Metals, 12 (5) 773 doi:10.3390/met12050773
	Rong, Youmin, Xu, Jiajun (2022) Forming Mechanism of Weld Cross Section and Validating Thermal Analysis Results Based on the Maximal Temperature Field for Laser Welding. Metals, 12 (5) 774 doi:10.3390/met12050774
	Gao, Pengfei, Sun, Zhidan, Retraint, Delphine (2022) Literature Review on the Fatigue Properties of Materials Processed by Surface Mechanical Attrition Treatment (SMAT) Metals, 12 (5) 775 doi:10.3390/met12050775
	Matsuno, Takashi, Matsuda, Tomoko, Shoji, Hiroto, Ohata, Mitsuru (2022) Evaluation of Fracture Strain for Cold Drawn Thin-Walled Steel Tubes via Small Round-Bar Tensile Test. Metals, 12 (5) 776 doi:10.3390/met12050776
	Kang, Minglong, Zhou, Li, Deng, Yunlai, Luo, Yajun, He, Maoqing, Zhang, Na, Huang, Zhonghua, Dong, Lijun (2022) Microstructure and Mechanical Properties of 4343/3003/6111/3003 Four-Layer Al Clad Sheets Subjected to Different Conditions. Metals, 12 (5) 777 doi:10.3390/met12050777
	Zhao, Yanhua, Du, Chuanbin, Wang, Peifu, Meng, Wei, Li, Changming (2022) The Mechanism of In-Situ Laser Polishing and Its Effect on the Surface Quality of Nickel-Based Alloy Fabricated by Selective Laser Melting. Metals, 12 (5) 778 doi:10.3390/met12050778
	Fan, Zengwei, Zhu, Jianan, Lian, Xintong, Liu, Tengshi, Xu, Dexiang, Wei, Xicheng, Dong, Han (2022) Microstructure, Inclusions, and Elemental Distribution of a Compacted Graphite Iron Alloyed by Ce and La Rare Earth (RE) Elements. Metals, 12 (5) 779 doi:10.3390/met12050779
	Cavaliere, Pasquale, Perrone, Angelo, Silvello, Alessio, Laska, Aleksandra, Blasi, Gianni, Cano, Irene G. (2022) Fatigue Bending of V-Notched Cold-Sprayed FeCoCrNiMn Coatings. Metals, 12 (5) 780 doi:10.3390/met12050780
	Zhao, Lu, Li, Kailun, Yao, Jun, Yuan, Yixiang, Du, Baorui (2022) The Laser Deposited Nickel-Aluminum Bronze Coatings on SUS630 Stainless Steel and Its Corrosion Resistance in 3.5 wt.% NaCl Solution. Metals, 12 (5) 781 doi:10.3390/met12050781
	Keerthiga, G., Vijayshankar, Dandapani, Prasad, MJNV, Peron, Mirco, Albinmousa, Jafar, Singh Raman, RK (2022) Electrochemical Corrosion Resistance of Mg Alloy ZK60 in Different Planes with Respect to Extrusion Direction. Metals, 12 (5) 782 doi:10.3390/met12050782
	Neto, Francisco Cavilha, Giaretton, Mauricio Vitor, Neves, Guilherme Oliveira, Aguilar, Claudio, Tramontin Souza, Marcelo, Binder, Cristiano, Klein, Aloísio Nelmo (2022) An Overview of Highly Porous Titanium Processed via Metal Injection Molding in Combination with the Space Holder Method. Metals, 12 (5) 783 doi:10.3390/met12050783
	Oberreiter, Matthias, Fladischer, Stefan, Stoschka, Michael, Leitner, Martin (2022) A Probabilistic Fatigue Strength Assessment in AlSi-Cast Material by a Layer-Based Approach. Metals, 12 (5) 784 doi:10.3390/met12050784
	Li, Yizhuo, Retraint, Delphine, Gao, Pengfei, Xue, Hongqian, Gao, Tao, Sun, Zhidan (2022) Effect of Surface Mechanical Attrition Treatment on Torsional Fatigue Properties of a 7075 Aluminum Alloy. Metals, 12 (5) 785 doi:10.3390/met12050785
	Wang, Xianzhen, Meng, Qingxuan, Wang, Tianze, Chu, Xuming, Fan, Aiqin, Wang, Hui (2022) New Insights into Fabrication of Al-Based Foam with Homogeneous Small Pore-Structure Using MgCO3/Zn Composite Powder as a Foaming Agent. Metals, 12 (5) 786 doi:10.3390/met12050786
	Rodrigues, Fabrício, Pinheiro, Paula, Sousa, Mário, Angélica, Rômulo, Paz, Simone, Reis, Marcos (2022) Electrical Properties of Iodine-Doped Cu/f-CNT Coated Aluminum Wires by Electrophoresis with Copper Sulfate Solution. Metals, 12 (5) 787 doi:10.3390/met12050787
	Cardoso, Giovana Collombaro, Buzalaf, Marília Afonso Rabelo, Correa, Diego Rafael Nespeque, Grandini, Carlos Roberto (2022) Effect of Thermomechanical Treatments on Microstructure, Phase Composition, Vickers Microhardness, and Young’s Modulus of Ti-xNb-5Mo Alloys for Biomedical Applications. Metals, 12 (5) 788 doi:10.3390/met12050788
	Wang, Li, Wang, Zhen, Xia, Yaping, Chen, Yangchun, Liu, Zhixiao, Wang, Qingqing, Wu, Lu, Hu, Wangyu, Deng, Huiqiu (2022) Effects of Point Defects on the Stable Occupation, Diffusion and Nucleation of Xe and Kr in UO2. Metals, 12 (5) 789 doi:10.3390/met12050789
	*Yang, Ying, Liang, Yongfeng, Li, Chan, Lin, Junpin (2022) Microstructure and Mechanical Properties of TiAl Matrix Composites Reinforced by Carbides. Metals, 12 (5) 790 doi:10.3390/met12050790*
	Slavković-Beškoski, Latinka, Ignjatović, Ljubiša, Bolognesi, Guido, Maksin, Danijela, Savić, Aleksandra, Vladisavljević, Goran, Onjia, Antonije (2022) Dispersive Solid–Liquid Microextraction Based on the Poly(HDDA)/Graphene Sorbent Followed by ICP-MS for the Determination of Rare Earth Elements in Coal Fly Ash Leachate. Metals, 12 (5) 791 doi:10.3390/met12050791
	Zhu, Haifeng, Wang, Xiaopeng, Meng, Wei, Kong, Fantao (2022) Effects of Heat Treatment on Microstructures and Properties of Cold Rolled Ti-0.3Ni Sheets as Bipolar Plates for PEMFC. Metals, 12 (5) 792 doi:10.3390/met12050792
	Elsayed, Abdallah, D’Elia, Francesco, Ravindran, Comondore, Sediako, Dimitry (2022) Observing the Effect of Grain Refinement on Crystal Growth of Al and Mg Alloys during Solidification Using In-Situ Neutron Diffraction. Metals, 12 (5) 793 doi:10.3390/met12050793
	Stratiotou Efstratiadis, Vasileios, Michailidis, Nikolaos (2022) Sustainable Recovery, Recycle of Critical Metals and Rare Earth Elements from Waste Electric and Electronic Equipment (Circuits, Solar, Wind) and Their Reusability in Additive Manufacturing Applications: A Review. Metals, 12 (5) 794 doi:10.3390/met12050794
	Springer, Sebastian, Leitner, Martin, Gruber, Thomas, Oberwinkler, Bernd, Lasnik, Michael, Grün, Florian (2022) Fatigue Assessment of Wire and Arc Additively Manufactured Ti-6Al-4V. Metals, 12 (5) 795 doi:10.3390/met12050795
	Liu, Xingjun, Peng, Qinghua, Pan, Shaobin, Du, Jingtao, Yang, Shuiyuan, Han, Jiajia, Lu, Yong, Yu, Jinxin, Wang, Cuiping (2022) Machine Learning Assisted Prediction of Microstructures and Young’s Modulus of Biomedical Multi-Component β-Ti Alloys. Metals, 12 (5) 796 doi:10.3390/met12050796
	*Madhavan, Nirmal, Brooks, Geoffrey, Rhamdhani, M. Akbar, Bordignon, Adam (2022) Contribution of CO2 Emissions from Basic Oxygen Steelmaking Process. Metals, 12 (5) 797 doi:10.3390/met12050797*
	Zhang, Renpeng, Wang, Zhongwei, Ma, Yanlong, Yan, Yu, Qiao, Lijie (2022) Effect of Cationic/Anionic Diffusion Dominated Passive Film Growth on Tribocorrosion. Metals, 12 (5) 798 doi:10.3390/met12050798
	Cheng, Yuanyao, Zhao, Gang, Xu, Deming, Bao, Siqian (2022) Effect of Prior Cold Reduction of C–Si–Mn Hot-Rolled Sheet on Microstructures and Mechanical Properties after Quenching and Partitioning Treatment. Metals, 12 (5) 799 doi:10.3390/met12050799
	Liu, Heyan, Ren, Yanwei, Wang, Kai, Mu, Xiaoming, Song, Shihao, Guo, Jia, Yang, Xiaojing, Lu, Zunming (2022) Magnetic-Field-Induced Strain Enhances Electrocatalysis of FeCo Alloys on Anode Catalysts for Water Splitting. Metals, 12 (5) 800 doi:10.3390/met12050800
	Wang, Ruibin, Mohanty, Itishree, Srivastava, Amiy, Roy, Tapas Kumar, Gupta, Prakash, Chattopadhyay, Kinnor (2022) Hybrid Method for Endpoint Prediction in a Basic Oxygen Furnace. Metals, 12 (5) 801 doi:10.3390/met12050801
	*Cruells, Montserrat, Roca, Antoni (2022) Jarosites: Formation, Structure, Reactivity and Environmental. Metals, 12 (5) 802 doi:10.3390/met12050802*
	Zhang, Yanxi, Gao, Xiangdong, You, Deyong, Jiang, Xiaoming, Ge, Wenjun (2022) Investigation of Laser Butt Welding of AISI 304L and Q235 Steels Based on Numerical and Experimental Analyses. Metals, 12 (5) 803 doi:10.3390/met12050803
	Carneiro, Vitor H., Grilo, José, Soares, Delfim, Duarte, Isabel, Puga, Hélder (2022) The Influence of Precipitation Hardening on the Damping Capacity in Al–Si–Mg Cast Components at Different Strain Amplitudes. Metals, 12 (5) 804 doi:10.3390/met12050804
	Xiao, Shuming, Han, Yang, Zhang, Yi, Wei, Qikun, Wang, Yifan, Wang, Na, Wang, Haodong, Liu, Jingxi, Liu, Yan (2022) A Reliability Analysis Framework of Ship Local Structure Based on Efficient Probabilistic Simulation and Experimental Data Fusion. Metals, 12 (5) 805 doi:10.3390/met12050805
	Li, Guangxian, Rahman Rashid, Rizwan Abdul, Ding, Songlin, Sun, Shoujin, Palanisamy, Suresh (2022) Machinability Analysis of Finish-Turning Operations for Ti6Al4V Tubes Fabricated by Selective Laser Melting. Metals, 12 (5) 806 doi:10.3390/met12050806
	Stanković, Srđan, Kamberović, Željko, Friedrich, Bernd, Stopić, Srećko R., Sokić, Miroslav, Marković, Branislav, Schippers, Axel (2022) Options for Hydrometallurgical Treatment of Ni-Co Lateritic Ores for Sustainable Supply of Nickel and Cobalt for European Battery Industry from South-Eastern Europe and Turkey. Metals, 12 (5) 807 doi:10.3390/met12050807
	Mendoza, Laura Esmeralda, Hernández, José Manuel, González, José Gonzalo, Orgaz, Emilio, Lozada, Octavio, Figueroa, Ignacio Alejandro (2022) Crystallization Kinetics of Hypo, Hyper and Eutectic Ni–Nb Glassy Alloys. Metals, 12 (5) 808 doi:10.3390/met12050808
	Yang, Xian, Liao, Jing, Hu, Jianjun, Hou, Xiang, Li, Hui, Song, Xule, Jiang, Peng, Guo, Ning (2022) Microstructure and Performance of Al-Coating on AZ31 Prepared by Pack-Cementation with Different Heating Methods. Metals, 12 (5) 809 doi:10.3390/met12050809
	Ma, Hongwei, Wang, Yiming, Zhang, Wei, Liu, Yan (2022) Experimental and Numerical Analysis of the Behavior of Beam–Column Connections with Reinforced Side Plates. Metals, 12 (5) 810 doi:10.3390/met12050810
	Chen, Jian, Liu, Tian-Wei, Cao, Fu-Hua, Wang, Hai-Ying, Chen, Yan, Dai, Lan-Hong (2022) Deformation Behavior and Microstructure Evolution of CoCrNi Medium-Entropy Alloy Shaped Charge Liners. Metals, 12 (5) 811 doi:10.3390/met12050811
	Han, Huaibin, Zhao, Xianming, Ding, Haochen, Zhang, Chi, Yu, Xueqing, Wang, Wei (2022) Numerical Simulation of Microstructure Evolution of Large GCr15 Bar during Multi-Pass Rough Rolling. Metals, 12 (5) 812 doi:10.3390/met12050812
	Ding, Jingxiu, Zhang, Ruipeng, Li, Yuchun, Zhang, David Wei, Lu, Hongliang (2022) Investigation of a Macromolecular Additive on the Decrease of the Aluminum Horizontal Etching Rate in the Wet Etching Process. Metals, 12 (5) 813 doi:10.3390/met12050813
	Nastasović, Aleksandra, Marković, Bojana, Suručić, Ljiljana, Onjia, Antonije (2022) Methacrylate-Based Polymeric Sorbents for Recovery of Metals from Aqueous Solutions. Metals, 12 (5) 814 doi:10.3390/met12050814
	Yu, Jiang, Miao, Xinglin, Zhang, Hongtao, Wang, Bo, Qu, Changming (2022) The Effect of Ti Content in the Filler Powder on Interfacial Microstructure and Mechanical Properties of C/C Composites/T2-Copper Joints via Thermo-Compensated Resistance Brazing Welding. Metals, 12 (5) 815 doi:10.3390/met12050815
	*Tomažič, Simon, Andonovski, Goran, Škrjanc, Igor, Logar, Vito (2022) Data-Driven Modelling and Optimization of Energy Consumption in EAF. Metals, 12 (5) 816 doi:10.3390/met12050816*
	Hu, Songsong, Zhao, Yunsong, Bai, Weimin, Wang, Xinming, Yin, Fucheng, Yang, Wenchao, Liu, Lin (2022) Temperature Field Evolution of Seeding during Directional Solidification of Single-Crystal Ni-Based Superalloy Castings. Metals, 12 (5) 817 doi:10.3390/met12050817
	Valiev, Roman R., Selivanov, Konstantin S., Smyslova, Marina K., Dyblenko, Yuri M., Savina, Yana N., Valiev, Ruslan Z., Semenova, Irina P. (2022) Enhanced Erosion Resistance of an Ultrafine-Grained Ti Alloy with a PVD Coating. Metals, 12 (5) 818 doi:10.3390/met12050818
	Hernández-Bocanegra, Constantin Alberto, Acosta-González, Francisco Andrés, Ramos-Banderas, José Ángel, López-Granados, Nancy Margarita (2022) Effect of Dissolved Salts on Steady-State Heat Transfer Using Excessive Cooling by Water-Air Mists. Metals, 12 (5) 819 doi:10.3390/met12050819
	Anwar, Mochammad Syaiful, Widjaya, Robert R., Prasetya, Leonardo Bayu Adi, Arfi, Abdul Aziz, Mabruri, Efendi, Siradj, Eddy S. (2022) Effect of Grain Size on Mechanical and Creep Rupture Properties of 253 MA Austenitic Stainless Steel. Metals, 12 (5) 820 doi:10.3390/met12050820
	*Muslić, Merima, Orešković, Luka, Rede, Vera, Maksimović, Vesna (2022) Indentation Size Effect of Composite A356 + 6%FA Subjected to ECAP. Metals, 12 (5) 821 doi:10.3390/met12050821*
	Wang, Yanhui, He, Qingsong, Yang, Qian, Xu, Dong, Yang, Zhinan, Zhang, Fucheng (2022) Microstructure Characteristics and Wear Performance of a Carburizing Bainitic Ferrite + Martensite Si/Al-Rich Gear Steel. Metals, 12 (5) 822 doi:10.3390/met12050822
	Wang, Gaosong, Peng, Chong, Zhang, Boyang, Xu, Zhaoyu, Li, Qiangqiang, Liu, Kun, Lu, Pengwei (2022) Effect of the Annealing Process on the Microstructure and Performance of 5056 Aluminum Alloy Wires. Metals, 12 (5) 823 doi:10.3390/met12050823
	Gao, Qian, Li, Jun, Wang, Xianhui, Gong, Jian, Li, Bo (2022) Characteristic of Precipitate Evolution during High Temperature Annealing in Grain-Oriented Silicon Steel. Metals, 12 (5) 824 doi:10.3390/met12050824
	Srisungsitthisunti, Pornsak, Kaewprachum, Boonrit, Yang, Zhigang, Gao, Guhui (2022) Real-Time Quality Monitoring of Laser Cladding Process on Rail Steel by an Infrared Camera. Metals, 12 (5) 825 doi:10.3390/met12050825
	Jiang, Cho-Pei, Chen, Po-Shen, Erisov, Yaroslav, Chen, Chang-Cheng (2022) Microforming a Miniature Cup-Shaped Internal Gear Using a Cold Lateral Extrusion Process. Metals, 12 (5) 826 doi:10.3390/met12050826
	*Chen, Shenghu, Rong, Lijian (2022) Oxidation Behavior of Intermetallic Phase and Its Contribution to the Oxidation Resistance in Fe-Cr-Zr Ferritic Alloy. Metals, 12 (5) 827 doi:10.3390/met12050827*
	Yu, Hongya, Li, Jiaming, Li, Jingzhou, Chen, Xi, Han, Guangze, Yang, Jianmin, Chen, Rongyin (2022) Enhancing the Properties of FeSiBCr Amorphous Soft Magnetic Composites by Annealing Treatments. Metals, 12 (5) 828 doi:10.3390/met12050828
	*Gu, Yingjian, Huang, Run, Hao, Yufei (2022) Review on Grain Refinement of Metallic Materials to Regulate Cellular Behavior. Metals, 12 (5) 829 doi:10.3390/met12050829*
	Chen, Guifeng, Long, Bolin, Jin, Lei, Zhang, Hui, Cheng, Zishuang, Zhang, Xiaoming, Liu, Guodong (2022) Synthesis of Weyl Semi-Metal Co3Sn2S2 by Hydrothermal Method and Its Physical Properties. Metals, 12 (5) 830 doi:10.3390/met12050830
	Churyumov, Alexander Yu., Kazakova, Alena A., Pozdniakov, Andrey V., Churyumova, Tatiana A., Prosviryakov, Alexey S. (2022) Investigation of Hot Deformation Behavior and Microstructure Evolution of Lightweight Fe-35Mn-10Al-1C Steel. Metals, 12 (5) 831 doi:10.3390/met12050831
	Štirbanović, Zoran, Urošević, Daniela, Đorđević, Milica, Sokolović, Jovica, Aksić, Nemanja, Živadinović, Novka, Milutinović, Sandra (2022) Application of Thionocarbamates in Copper Slag Flotation. Metals, 12 (5) 832 doi:10.3390/met12050832
	Wang, Yingchun, Xu, Rongjun, Zhong, Honggang, Xu, Guodong, Xu, Zhishuai, Li, Renxing, Zhai, Qijie (2022) Effects of Pulsed Magneto-Oscillation on the Homogeneity of Low Carbon Alloy Steel Continuous Casting Round Billet. Metals, 12 (5) 833 doi:10.3390/met12050833
	Nasiri, Samaneh, Yang, Guang, Spiecker, Erdmann, Li, Qianqian (2022) An Improved Approach to Manufacture Carbon Nanotube Reinforced Magnesium AZ91 Composites with Increased Strength and Ductility. Metals, 12 (5) 834 doi:10.3390/met12050834
	Li, Xin, Wei, Guangsheng, Zhu, Rong, Tian, Bohan, Zhao, Ruimin, Lan, Xinyi (2022) Study on the Characteristics of Coherent Supersonic Jet with Superheated Steam. Metals, 12 (5) 835 doi:10.3390/met12050835
	*Mikhaylov, Alexey, Grilli, Maria Luisa (2022) Machine Learning Methods and Sustainable Development: Metal Oxides and Multilayer Metal Oxides. Metals, 12 (5) 836 doi:10.3390/met12050836*
	Zhao, Ren-Feng, Gao, Wei-Cheng, Zhang, Dong-Ya, Xiao, Xu-Dong, Liu, Yan-Wei, Pan, Run-Ze (2022) New Technology and Experimental Research on Thick-Walled Tube Fatigue Impact Loading Precision Separation. Metals, 12 (5) 837 doi:10.3390/met12050837
	Xie, Yikui, Wang, Qicheng, Chen, Zikun, Wu, Xiaodong, Liu, Hui, Wang, Zhongying (2022) Recrystallization Mechanism and Processing Map of 18CrNiMo7-6 Alloy Steel during Hot Deformation. Metals, 12 (5) 838 doi:10.3390/met12050838
	Liang, Xiao, Li, Xianjun, Wang, Decheng, Lin, Xiyue, Luo, Ping, Tan, Zhunli, Song, Yong, Tian, Yu, Hou, Junqing, Jiang, Chao, Bian, Yi, Xie, Huasheng (2022) Numerical and Experimental Study on Hot Forming by Partition Cooling of 38MnB5Nb. Metals, 12 (5) 839 doi:10.3390/met12050839
	Zhu, Mingmei, Peng, Sikun, Jiang, Kunchi, Luo, Jie, Zhong, Yong, Tang, Ping (2022) Fluid Flow and Heat Transfer Behaviors under Non-Isothermal Conditions in a Four-Strand Tundish. Metals, 12 (5) 840 doi:10.3390/met12050840
	*Zhang, Liang-Liang, Zhang, Lin-Jie, Yang, Qing-Jie (2022) Weldability of Molybdenum–Rhenium Alloy Based on a Single-Mode Fiber Laser. Metals, 12 (5) 841 doi:10.3390/met12050841*
	Li, Zhiyong, Yu, Gang, He, Xiuli, Li, Shaoxia, Shu, Zhuang (2022) Surface Tension-Driven Flow and Its Correlation with Mass Transfer during L-DED of Co-Based Powders. Metals, 12 (5) 842 doi:10.3390/met12050842
	Ni, Ao, Li, Chengzhi, Zhang, Wei, Xiao, Zhixin, Liu, Dongliang, Xue, Zhengliang (2022) Investigation of the Hearth Erosion of WISCO No. 1 Blast Furnace Based on the Numerical Analysis of Iron Flow and Heat Transfer in the Hearth. Metals, 12 (5) 843 doi:10.3390/met12050843
	Ding, Weitian, Qi, Bing, Chen, Huiting, Li, Ying, Xiong, Yuandong, Saxén, Henrik, Yu, Yaowei (2022) Numerical Simulation of Bubble and Velocity Distribution in a Furnace. Metals, 12 (5) 844 doi:10.3390/met12050844
	Wu, Yue, Dong, Yaqiang, Yang, Munan, Jia, Xingjie, Liu, Zhonghao, Lu, Hao, Zhang, Haijie, He, Aina, Li, Jiawei (2022) Effect of Annealing Process on Microstructure and Magnetic Properties of FeSiBPCNbCu Nanocrystalline Soft Magnetic Powder Cores. Metals, 12 (5) 845 doi:10.3390/met12050845
	*Zhan, Dongping, Wang, Jiaxi, Huang, Luoyi, Zhang, Huishu (2022) Effect of Slag Compositions on Change Behavior of Nitrogen in Molten Steel. Metals, 12 (5) 846 doi:10.3390/met12050846*
	*Novikov, Vseslav, Stepanov, Nikita, Zherebtsov, Sergey, Salishchev, Gennady (2022) Structure and Properties of High-Entropy Nitride Coatings. Metals, 12 (5) 847 doi:10.3390/met12050847*
	Wang, Jian, Yin, Pengfei, Liu, Junchi, Zhang, Tao, Wang, Shusheng, Liu, Lei (2022) Transferring A4 Paper to FeNi3/NiCx Coated Carbon Skeleton for Efficient Absorption of Multiband Microwave. Metals, 12 (5) 848 doi:10.3390/met12050848
	Pan, Horng-Bin, Strivens, Jonathan E., Kuo, Li-Jung, Wai, Chien M. (2022) Sequestering Rare Earth Elements and Precious Metals from Seawater Using a Highly Efficient Polymer Adsorbent Derived from Acrylic Fiber. Metals, 12 (5) 849 doi:10.3390/met12050849
	Qiu, Chao, Liang, Shuai, Li, Meng, Cheng, Han, Qin, Wenfeng (2022) Preparation and Application of a New Two-Component Superhydrophobic Coating on Aluminum Alloy. Metals, 12 (5) 850 doi:10.3390/met12050850
	Gao, Changqi, Wang, Qiaobo, Wei, Mingyu, Fan, Hongjing, Zhao, Libo, Wei, Yupeng, Ma, Qin (2022) Effects of Reinforcement Volume Fraction on Mechanical Properties and Microstructures of 7075Al Matrix Composites Reinforced by FeCoCrNiAl High-Entropy Alloy Particles. Metals, 12 (5) 851 doi:10.3390/met12050851
	Rehman, Anees Ur, Ullah, Najeeb, Saeed, Muhammad Abid, Khalil, Usman Khan (2022) Enhanced Absorption Performance of Dye-Sensitized Solar Cell with Composite Materials and Bilayer Structure of Nanorods and Nanospheres. Metals, 12 (5) 852 doi:10.3390/met12050852
	Gebril, Mohamed Abdelgawad, Omar, Mohd Zaidi, Mohamed, Intan Fadhlina, Othman, Norinsan Kamil, Irfan, Osama M. (2022) Combining Heat Treatment and High-Pressure Torsion to Enhance the Hardness and Corrosion Resistance of A356 Alloy. Metals, 12 (5) 853 doi:10.3390/met12050853
	He, Jingui, Tao, Wenju, Dong, Guozhen (2022) Study on Extraction Performance of Vanadium (V) from Aqueous Solution by Octyl-Imidazole Ionic Liquids Extractants. Metals, 12 (5) 854 doi:10.3390/met12050854
	Jimenez, Ane, Sanchez, Jon Mikel, Girot, Franck, Renderos, Mario, Egizabal, Pedro (2022) Numerical Modeling of the Influence of Nanometric Ceramic Particles on the Nucleation of AlSi10MnMg Alloy. Metals, 12 (5) 855 doi:10.3390/met12050855
	Fan, Yusong, Gui, Xiaolu, Liu, Miao, Wang, Xi, Feng, Chun, Gao, Guhui (2022) High-Cycle Fatigue Life and Strength Prediction for Medium-Carbon Bainitic Steels. Metals, 12 (5) 856 doi:10.3390/met12050856
	*Wu, Long, Wang, Hongyang, Dong, Kai (2022) Effect of Sulfur Content on Copper Recovery in the Reduction Smelting Process. Metals, 12 (5) 857 doi:10.3390/met12050857*
	Ying, Jun, Yang, Zhaojun, Chen, Chuanhai, Tian, Hailong, Deng, Fuqin, Li, Jieli (2022) Stress Intensity Factors for Radial Crack on Inner Surface of Interface in Multi-Layer Rotating Thick-Walled Cylinder. Metals, 12 (5) 858 doi:10.3390/met12050858
	Xu, Wei, Chen, Pengyu, Li, Mao, Mao, Liuwei, Hou, Hailiang (2022) Effect of Stiffener Strength on the Failure Mode of Stiffened Plate under Confined Explosion: Experimental Studies. Metals, 12 (5) 859 doi:10.3390/met12050859
	Zhou, Dongdong, Gao, Feng, Wang, Junjian, Xu, Ke (2022) Study of Surface Temperature Distribution for High-Temperature U75V Rail Steel Plates in Rolling Process by Colorimetry Thermometry. Metals, 12 (5) 860 doi:10.3390/met12050860
	*Takahashi, Masatoshi, Kikuchi, Masafumi, Takada, Yukyo (2022) Grindability of Ti−Nb−Cu Alloys for Dental Machining Applications. Metals, 12 (5) 861 doi:10.3390/met12050861*
	*Guthrie, Roderick I. L., Isac, Mihaiela M. (2022) Continuous Casting Practices for Steel: Past, Present and Future. Metals, 12 (5) 862 doi:10.3390/met12050862*
	Duarte, Thiago, Meyer, Yuri A., Osório, Wislei R. (2022) The Holes of Zn Phosphate and Hot Dip Galvanizing on Electrochemical Behaviors of Multi-Coatings on Steel Substrates. Metals, 12 (5) 863 doi:10.3390/met12050863
	Mikeli, Eleni, Marinos, Danai, Toli, Aikaterini, Pilichou, Anastasia, Balomenos, Efthymios, Panias, Dimitrios (2022) Use of Ion-Exchange Resins to Adsorb Scandium from Titanium Industry’s Chloride Acidic Solution at Ambient Temperature. Metals, 12 (5) 864 doi:10.3390/met12050864
	Wu, Minxuan, Zheng, Biju, Zhang, Defeng, Huang, Taihong, Li, Chao, Li, Qing, Huang, Wenlang, Zhang, Luyang, Song, Peng (2022) Effect of Water Vapor on the Microstructure of Al2O3 on the Free-Standing MCrAlY Alloy at 1100 °C. Metals, 12 (5) 865 doi:10.3390/met12050865
	Landgraf, Pierre, Bergelt, Tim, Rymer, Lisa-Marie, Kipp, Christian, Grund, Thomas, Bräuer, Günter, Lampke, Thomas (2022) Evolution of Microstructure and Hardness of the Nitrided Zone during Plasma Nitriding of High-Alloy Tool Steel. Metals, 12 (5) 866 doi:10.3390/met12050866
	*Ericsson, Anders, Fisk, Martin (2022) Modeling of Diffusion-Controlled Crystallization Kinetics in Al-Cu-Zr Metallic Glass. Metals, 12 (5) 867 doi:10.3390/met12050867*
	*Fagnoni, Francesco, Konarski, Piotr (2022) Hydrogen Degassing of Zirconium under High-Vacuum Conditions. Metals, 12 (5) 868 doi:10.3390/met12050868*
	Oesterwinter, Annika, Wischer, Christian, Homberg, Werner (2022) Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC) Metals, 12 (5) 869 doi:10.3390/met12050869
	Postel, Victor, Petit, Johann, Wang, Chong, Tan, Kai, Ranc-Darbord, Isabelle, Wang, Qingyuan, Wagner, Daniele (2022) In-Situ Thermography Investigation of Crack Growth in Armco Iron under Gigacycle Fatigue Loading. Metals, 12 (5) 870 doi:10.3390/met12050870
	Wang, Cui, Zhang, Jianliang, Chen, Wen, Li, Xiaolei, Jiao, Kexin, Pang, Zhenping, Wang, Zhongyi, Wang, Tongsheng, Liu, Zhengjian (2022) Comparative Analysis on the Corrosion Resistance to Molten Iron of Four Kinds of Carbon Bricks Used in Blast Furnace Hearth. Metals, 12 (5) 871 doi:10.3390/met12050871
	He, Zhibo, Li, Chen, Li, Yuebing, Jin, Weiya, Gao, Zengliang (2022) Prediction of Fracture Toughness Scatter Based on Weibull Stress Using Crystal Plasticity Finite Element Method. Metals, 12 (5) 872 doi:10.3390/met12050872
	Wei, Ping, Wu, Mingfang, Liu, Dashuang, Liang, Yun, Zhao, Ziqiang (2022) Face Bend Property of 7N01-T4 Aluminum Alloy MIG Welded Joint by Using Different Welding Wires. Metals, 12 (5) 873 doi:10.3390/met12050873
	Shi, Laixin, Xiang, Lin, Tao, Jianquan, Chen, Qiang, Liu, Jun, Zhong, Yong (2022) Actual Marine Atmospheric Pre-Corrosion Fatigue Performance of 7075-T73 Aluminum Alloy. Metals, 12 (5) 874 doi:10.3390/met12050874
	Zhou, Bangfei, Guo, Xianghui, Lin, Wenhao, Liu, Ying, Guo, Yifeng, Zheng, Tianxiang, Zhong, Yunbo, Wang, Hui, Wang, Qiuliang (2022) Effect of Vertical High Magnetic Field on the Morphology of Solid-Liquid Interface during the Directional Solidification of Zn-2wt.%Bi Immiscible Alloy. Metals, 12 (5) 875 doi:10.3390/met12050875
	Xiao, Zigen, Huang, Yun, Liu, Zhixiao, Hu, Wangyu, Wang, Qingtian, Hu, Chaowei (2022) The Role of Grain Boundaries in the Corrosion Process of Fe Surface: Insights from ReaxFF Molecular Dynamic Simulations. Metals, 12 (5) 876 doi:10.3390/met12050876
	Zhou, Wenbin, Xi, Ziqi (2022) Bending Behaviour Analysis of Aluminium Profiles in Differential Velocity Sideways Extrusion Using a General Flow Field Model. Metals, 12 (5) 877 doi:10.3390/met12050877
	You, Qingfa, Xu, Mingxian, Zhu, Baoyi, Xiong, Liangshan, Yin, Kai (2022) Experimental Modeling of the Bifurcation Set Equation of the Chip-Splitting Catastrophe in Symmetrical Straight Double-Edged Cutting. Metals, 12 (5) 878 doi:10.3390/met12050878
	Pan, Liu, Wang, Zhen, Wang, Qingqing, Liu, Zhixiao, Pan, Min, Huang, Zheng, Wu, Lu (2022) Influence of Th, Zr, and Ti Dopants on Solution Property of Xe in Uranium Dioxide with Defects: A DFT + U Study. Metals, 12 (5) 879 doi:10.3390/met12050879
	Baltazar-Hernández, Víctor H., López-Baltazar, Enrique A., Alvarado-Hernández, Francisco, Gómez-Jiménez, Salvador, Ruiz-Mondragón, José Jorge, Biro, Elliot, Zhou, Norman (2022) Surface Residual Stress Analysis in GMAW and LBW of the Dissimilar TRIP-DP Steels Joint: An Experimental Approach. Metals, 12 (5) 880 doi:10.3390/met12050880
	Liu, Shuai, Luo, Xian, Huang, Bin, Yang, Yanqing (2022) Influence of Supersaturation on Growth Behavior and Mechanical Properties of Polycrystalline 3C-SiC on W Wire Substrate. Metals, 12 (5) 881 doi:10.3390/met12050881
	Prasetyo, Erik, Anderson, Corby, Jaya, Arya Fitra, Muryanta, Widya Aryani, Handoko, Anton Sapto, Amin, Muhammad, Al Muttaqii, Muhammad, Bahfie, Fathan (2022) Fractionation of Transition Metals by Solvent Extraction and Precipitation from Tannic Acid-Acetic Acid Leachate as a Product of Lithium-Ion Battery Leaching. Metals, 12 (5) 882 doi:10.3390/met12050882
	Yu, Hui, Ren, Junchao, Kang, Shaoming, Yu, Wei, Wang, Zhifeng, Feng, Jianhang, Wang, Qingzhou, Ji, Puguang, Zhang, Xin, Yin, Fuxing (2022) Effect of 1wt%Zn Addition on Microstructure and Mechanical Properties of Mg-6Er Alloys under High Strain Rates. Metals, 12 (5) 883 doi:10.3390/met12050883
	Zhang, Ye, Li, Song, Li, Dongyang, Li, Yimin, He, Hao, Shu, Chang (2022) Enhanced Mechanical Performance of a Biodegradable Fe–Mn Alloy Manufactured by Metal Injection Molding and Minor Carbon Addition. Metals, 12 (5) 884 doi:10.3390/met12050884
	Kamireddy, Vaishak, Wang, Dongqing, Pan, Wen, Chen, Shaoguo, Evans, Tim, Tang, Fengqiu, Zhao, Baojun, Ma, Xiaodong (2022) Liquid Formation in Sinters and Its Correlation with Softening Behaviour. Metals, 12 (5) 885 doi:10.3390/met12050885
	Xia, Huxiang, Li, Xiaoya, Xu, Qingyan (2022) Macro-Micro-Coupling Simulation and Space Experiment Study on Zone Melting Process of Bismuth Telluride-Based Crystal Materials. Metals, 12 (5) 886 doi:10.3390/met12050886
	Yang, Yongjing, Bhowmik, Ayan, Tan, Jin Lee, Du, Zehui, Zhou, Wei (2022) A New Strategy for Dissimilar Material Joining between SiC and Al Alloys through Use of High-Si Al Alloys. Metals, 12 (5) 887 doi:10.3390/met12050887
	Zhang, Ziwei, Yu, Jianmin, Wu, Zeru, Hu, Hongbing, Zhang, Zhimin, Meng, Mo, Xue, Yong, Li, Xubin (2022) The Microstructure Evolution of Mg-RE Alloy Produced by Reciprocating Upsetting Extrusion during Hot Compression. Metals, 12 (5) 888 doi:10.3390/met12050888
	Xie, Bin, Wang, Xinyu, Fan, Yongsheng, Li, Ruizhi (2022) Atomistic Investigation on the Strengthening Mechanism of Single Crystal Ni-Based Superalloy under Complex Stress States. Metals, 12 (5) 889 doi:10.3390/met12050889
	Liu, Jianling, Das, Yadunandan, King, Stephen M., Jonsson, Jan Y., Wessman, Sten, Hedström, Peter (2022) Effect of Cooling Rate after Solution Treatment on Subsequent Phase Separation Evolution in Super Duplex Stainless Steel 25Cr-7Ni (wt.%) Metals, 12 (5) 890 doi:10.3390/met12050890

	*(2022, May) Minerals* Vol. 12 (5) MDPI AG**
	*(2022, May) Life* Vol. 12 (5) MDPI AG**
	*(2022, May) Crystals* Vol. 12 (5) MDPI AG**
	*(2022, May) Geosciences* Vol. 12 (5) MDPI AG**
	*(2015, May) Metals* Vol. 5 (2) MDPI AG**
	*(2016, May) Metals* Vol. 6 (5) MDPI AG**
	*(2017, May) Metals* Vol. 7 (5) MDPI AG**
	*(2018, May) Metals* Vol. 8 (5) MDPI AG**
	*(2019, May) Metals* Vol. 9 (5) MDPI AG**
	*(2021, May) Metals* Vol. 11 (5) MDPI AG**
	*(2023, May) Metals* Vol. 13 (5) MDPI AG**

(2022, May) Metals Vol. 12 (5) MDPI AG

Contains

See Also